VDC5 Bell End Anchor

This fitting anchors VDC5 into a hand hole or enclosure. The fitting also creates a smooth end transition into the VDC5 conduit.

Category:

Description

This fitting anchors VDC5 into a hand hole or enclosure. The fitting also creates a smooth end transition into the VDC5 conduit.

previous arrow
next arrow
ArrowArrow
Slider

Additional information

ID

16603

Features

Anchors the VDC5 conduit into a vault or handhole
The fitting is split to allow cables to be inlaid in
Creates a smooth transition with no sharp edges into the VDC5 conduit
The fitting mounts flush to the inside walls of the vault or handhole
Can be installed using a standard hole saw (3.75" bit)
Can be fixed to a vault or handhole by using a compression ring or by simply screwing the square flange into the body of the vault or handhole

Specifications

Assembly weight — 255 grams (0.56lbs)
Installed Dimensions
Square flange size — 140mm x 140mm (5.5"x5.5")
Body diameter — 95mm (3.75")
Body depth — 80mm (3.15")
Material
Body — 10% glass filled nylon
Fastener — Stainless Steel
Tools Required for Assembly
Philips screw driver
3.75" hole saw

Applications

The fitting is ideal for FTTH and FTTB applications. The system works well with flat aerial drop cables.